The emulsion explosive vehicle is a latex-based box used to install the latex base prepared at the ground station onto the vehicle, while also loading the sensitizers and catalysts onto the vehicle. This type of vehicle has two sets of processes, equipped with two sets of sensitization systems and catalytic systems. One of them is pre-pump sensitization and catalysis; the other is endpoint sensitization and catalysis, using a dual water ring system with low pressure and a longer transportation distance. The pressurized explosive is suitable for blasting projects such as roads and tunnels. Such vehicles have a large service radius and are suitable for single-site construction and multi-point distribution. The advanced computer system, equipped with overheat, overpressure, material fracture alarm and shutdown safety protection systems, ensures safe and reliable operation.
The mixed carrier of the emulsion explosive contains the explosive materials. After arriving at the blasting site, the mixed materials are loaded into the blasting holes to form the explosive. If the output system malfunctions or there is a shortage of materials, the hybrid power vehicle will immediately give an alarm and shut down. The intelligent control system uses a PLC programmable controller, combined with system sensors, to synchronize the operation of mechanical, electrical and hydraulic systems, forming a closed-loop control, making the ratio of explosive raw materials more precise, the blasting effect more stable and reliable, and the accuracy of single-hole loading ±2%. The information system uses an industrial control computer to achieve functions such as data collection, data collection, data storage, data transmission, real-time dynamic monitoring and real-time geographical location monitoring. In particular, the BCRH-15 intelligent on-site mixed emulsion explosive vehicle can transport from a long distance to a 50-meter blasting hole, and the transportation distance is twice that of similar domestic models. This is the first of its kind in China. The quality of the manufacturing and procurement process is strictly controlled, and the process documents are strictly followed. During the testing process, the hybrid power vehicle conducted component tests, system tests, vehicle simulation linkage tests and industrial tests to determine its suitability. The BCRH series intelligent on-site mixed emulsion explosive vehicles ultimately meet the standards of on-site mixed emulsion explosive vehicles, the mining safety requirements of mixed emulsion explosive vehicles, the dynamic monitoring information system of on-site mixed emulsion explosive vehicles and the relevant standards and regulations of the automotive industry.
Hot Tags: mobile explosives manufacturing unit, China mobile explosives manufacturing unit manufacturers, suppliers, factory, Anfo Explosives Truck, Emulsion Explosive Vehicle, Explosives Charging Vehicles, Heavy ANFO Units, Matrix Emulsion Truck, Mixed Explosive Truck
Main parameters
Maximum load capacity of the matrix box: 12 cubic meters, 16,000 kilograms of latex matrix
Sensitization chamber, volume 0.12 cubic meters, sensitizing agent 120 kilograms
The volume of the catalytic chamber is 0.12 cubic meters and the catalyst loading is 120 kilograms.
A water tank and a cleaning container with a capacity of 1 cubic meter, holding 1000 kilograms of water.
Load efficiency: 250 - 280 kilograms per minute
Measurement error ≤ 1%
Dimensions: Length/Width/Height (10860*2500*3930mm)
Total weight: 32,000 kilograms
Quality of preparation: 16,000 kilograms
